/  Metrology Equipment  /  Laser Measurement Systems  /  

Tire Industry Products

  /  

On-Line Profilometer

 /

OLP-300

On-Line Profilometer (OLP) Real-Time Measurement System #(--edpnumber)#

Tire Industry Products
On-Line Profilometer (OLP) Real-Time Measurement System

The On-Line Profilometer (OLP) is an on-line, real-time measurement system for continuously monitoring key profile dimensions in complex tread and sidewall extrusions. OLP employs CrossCheck™ line laser sensors manufactured by Bytewise. These multi-sensor systems acquire thousands of data points around the profile and match them to a CAD template, where key measurement thickness and width parameters are extracted. Measurement parameters are compared to allowable control limits and displayed on the operator’s terminal with a green/yellow/red (pass/caution/fail) status indicator. Profiles are acquired at a user-set rate up to 14 profiles per second and all measurements are recorded to a history file. OLP is available in several width sizes, from 150mm to 1200mm, in 150mm increments.

Features
Specifications
Product Testimonials
Contact Starrett

Features

  • The C-Frame Design allows the installation and removal of system without interrupting production
  • The O-Frame Design includes a reinforced frame for added stability
  • Run Mode feature allows the system to run continuously at a clock frequency or be triggered from an encoder or relay contact
  • Communication Interface feature communicates measure values to external systems by Modbus TCP or OPC Server
  • Analog Output Option is used to stream analog measure values to external systems
  • Alarm Option includes an alarm via red/yellow/green light tower with horn
  • The Registration feature provides fast and easy automatic calibration and alignment checking
  • The Optical Comparator Display compares a measured profile to a CAD template same as a 10X Optical Comparator
  • Caliper Tool Bar measures the thickness, width, angle, radius, radius center point, bump, link, line regression, and formula
  • Matching feature compares the measured profile to the design template (CAD file)
  • Multiple Profile Matching feature automatically matches multiple profiles that move independently
  • Sub-Region Matching feature matches partial segments of flexible profiles to a CAD template independently
  • Measurement Display features real time value, trend chart, cp, cpk, mean, and histogram
  • Data Logging records all measurements to a dat log file
  • Report feature allows the user to print a Quality Report for each run
  • Time Stamp feature records each measurement cycle with a date and time stamp to support quality audits
  • Error Vector Display feature highlights profile deviation from CAD template
  • Multiple Datum Anchor establishes multiple three-point datums for profile matching
  • Auto-Save Snapshot feature saves a complete profile visualization and data set on a user-defined clock interval
  • Vortex Cooling Option maintains cool operating temperature in hot environments

Specifications

  • Made in America: Yes
  • Product Type: On-Line Profilometer
  • Field-of-View, Width: Custom
  • Field-of-View, Depth: 60 mm
  • Frame Type: C
  • Accuracy, Width: 0.25 mm
  • Width Repeatability (1s): 0.12 mm
  • Accuracy, Thickness: 0.06 mm
  • Thickness Repeatability (1s): 0.03
  • Laser Frequency, Maximum: 14 Hz
  • Exposure Time, Typical: 0.03 Sec
  • Current at 230V: 15 A
  • Laser Classification, CDRH: IIIa
  • Laser Classification, IEC: 3R
  • Low Voltage Directive: Yes
  • EMC Directive: Yes
  • Machinery Directive: Yes

Product Testimonials

    Write a product review